Due to the large price increase in shipping to Canada we are now shipping USPS First-Class Mail International to Canada for $16usd, has no tracking number and will take 2-3 weeks to arrive. USPS Priority Mail International will still be available by request it's $29usd, email dukencaabb@yahoo.com for an invoice, it comes with tracking and arrives in 1-2 weeks.
If the paypal button does not work or does not show the shipping price for you please email @ dukencaabb@yahoo.com for assistance. For orders of two or more contact me at dukencaabb@yahoo.com for shipping.
Thanks,
Larry
Thanks,
Larry
The Carolina Storm Bucket Wheel
Raspberry Sparkles
The Carolina Storm Bucket Wheel
We are proud to now offer the Carolina Storm bucket wheel for $25.00 plus shipping. This custom made bucket wheel is very quiet and easy to clean. It has six height adjustments and can be tilted for desired pitch/angle. The running surface is safe, solid and smooth for a hedgies tender little feet. The wheel comes in several colors: Raspberry Sparkles, Blue, Pink, Red, Lime Green,Sparkly Blue and Sparkly Green. Ships within 24 hours after payment is made in most cases. For large orders contact me at dukencaabb@yahoo.com for special pricing.
 Lime green |  Sparkly Blue |
 Xena on her new pink bucket wheel |  Pink |
Payment Details
Carolina Storm Hedgehogs will accept payment through Paypal, check or money order.
If you any questions email them to dukencaabb@yahoo.com
If you are paying by check or money order the wheel will not ship until funds have cleared. For large orders contact me at dukencaabb@yahoo.com for special pricing.
If you any questions email them to dukencaabb@yahoo.com
If you are paying by check or money order the wheel will not ship until funds have cleared. For large orders contact me at dukencaabb@yahoo.com for special pricing.
 Xavier on his Sparkly Green bucket wheel |  Sparkly Green |
Measurements
The running surface is five and a half inches wide. The diameter of the wheel is ten and half inches. On the lowest possible height setting the wheel is approximately eleven inches tall. On the highest possible height setting the wheel is twelve and half inches tall. The stand is twelve inches wide.
 Blue |  Blue |
Shipping Details
Shipping is available to most anywhere in the world via the United States Postal Service (USPS) at the Buyers expense. If your shipping price does not show up in the shopping cart email me at dukencaabb@yahoo.com for price. Orders will ship within 24 hours in most cases,48 hours at the most.
 Xavier checking out this new red bucket wheel |  Red |
Cleaning
For cleaning I recommend the O-Cel-O Dishwand filled with Ivory Dish Soap. These are both readily available at Target, Walmart and most local grocery stores. There are many ways to clean the wheel, just be sure not to use anything abrasive for cleaning and please do not get the rollerblade wheel bearings wet while cleaning!
 Six colors to choose from |  Six colors to choose from |
Wheel FAQ
Q) What's the difference in the two wheels you have for sale?
A) This link should help
http://hedgehogcentral.com/forums/viewtopic.php?f=8&t=12428&start=0
Q) What are the zip ties/plastic things that came with the wheel for?
A) They are spares, so if one ever breaks on the wheel you have a replacement.
Q) The legs/feet on the stand are uneven how can I fix this?
A) The PVC and fittings are not glued so with a little force and play you can position the legs/feet back even.
Q) How do you tilt the wheel?
A) Hold the feet of the stand down with one arm, now grab the top arm (the PVC piece with the holes drilled in it) and pull or push in desired direction for the running angle that best suits your hog. Nothing is glued,sometimes it may take a little force and play to get it just right.
Q) I took my wheel apart for cleaning and forgot how it was suppose to go back together?
A) Take the long carriage bolt and run it through the inside of the wheel......now take the small nut and run it down the bolt till it's tite against the rollerblade wheel........now add a washer..........next the pvc arm peice in desired hole........now another washer..............finish with the wing nut.
Q) Do the nuts ever need to be tightened?
A) Yes, it's best to tighten both nuts, the small one against the roller blade and the wing nut, once a week.
Q) I got the bearings wet and the wheel has gotten loud?
A) If the bearings have gotten wet you can try putting a glob of Vaseline on the bearing and use a hair dryer to melt the Vaseline into the bearing. Turn it while heating. After one side is done do the other. Sometimes a little veg. oil will work just as well.
Q) My wheel has gotten loud, what can I do?
A) Make sure all the nuts are tightened and everything is in order. Now give the wheel a spin. Do you hear anything? If so it's most likely a bad bearing, see above for ways to fix it. If you hear nothing it could be from uneven feet on the stand, check them. Could also be from the hog running so hard the wheel is bouncing around or just causing a vibration. If so try securing the wheel to the cage with zip ties or something of that sort. Could be the cage itself, some cage floors are not perfectly flat, if so you can try fleece or something of that sort to level it up.
Q) Any tips for keeping the bearing from getting wet while cleaning?
A) Take your time and dry well. A piece of duct tape over the bolt and zip tie area works very well too, just be sure to remove it.
A) This link should help
http://hedgehogcentral.com/forums/viewtopic.php?f=8&t=12428&start=0
Q) What are the zip ties/plastic things that came with the wheel for?
A) They are spares, so if one ever breaks on the wheel you have a replacement.
Q) The legs/feet on the stand are uneven how can I fix this?
A) The PVC and fittings are not glued so with a little force and play you can position the legs/feet back even.
Q) How do you tilt the wheel?
A) Hold the feet of the stand down with one arm, now grab the top arm (the PVC piece with the holes drilled in it) and pull or push in desired direction for the running angle that best suits your hog. Nothing is glued,sometimes it may take a little force and play to get it just right.
Q) I took my wheel apart for cleaning and forgot how it was suppose to go back together?
A) Take the long carriage bolt and run it through the inside of the wheel......now take the small nut and run it down the bolt till it's tite against the rollerblade wheel........now add a washer..........next the pvc arm peice in desired hole........now another washer..............finish with the wing nut.
Q) Do the nuts ever need to be tightened?
A) Yes, it's best to tighten both nuts, the small one against the roller blade and the wing nut, once a week.
Q) I got the bearings wet and the wheel has gotten loud?
A) If the bearings have gotten wet you can try putting a glob of Vaseline on the bearing and use a hair dryer to melt the Vaseline into the bearing. Turn it while heating. After one side is done do the other. Sometimes a little veg. oil will work just as well.
Q) My wheel has gotten loud, what can I do?
A) Make sure all the nuts are tightened and everything is in order. Now give the wheel a spin. Do you hear anything? If so it's most likely a bad bearing, see above for ways to fix it. If you hear nothing it could be from uneven feet on the stand, check them. Could also be from the hog running so hard the wheel is bouncing around or just causing a vibration. If so try securing the wheel to the cage with zip ties or something of that sort. Could be the cage itself, some cage floors are not perfectly flat, if so you can try fleece or something of that sort to level it up.
Q) Any tips for keeping the bearing from getting wet while cleaning?
A) Take your time and dry well. A piece of duct tape over the bolt and zip tie area works very well too, just be sure to remove it.
Need liners,bags, etc,? Go here!
